Telephone:

+31 (0)184.651.451

Fax:

+31 (0)184.651.762

E-mail:

info@pooltrading.com 

Web site:

www.pooltrading.com 

Caterpillar D-343

marine engine, running take-out / core, 360hp @ 1800rpm, s/n 33B-6719,  SAE-0 flywheel hsg + 18” flywheel, water cooled exh. manifold and turbo, 24V starter.

Caterpillar D-346 

industrial engine, excellent running take-out, 1100 running hours, 600 hp / 2000 rpm, S/N 39J-1930, SAE-0 fly wheel housing + 18 inch" fly wheel, water cooled exhaust manifolds, air starter, hydraulic governor, expansion tank, keel cooled, air filters.

Caterpillar 3208 DINA

marine engine, good running take-out, Y.O.M. 1988, 210 hp @ 2800 rpm, s/n 75V-09935, a/r 1W-0356, SAE-2 flywheel hsg. + 11,5” flywheel, water cooled exhaust manifold, 24V starter + alternator, expansion tank, heat exchanger, sea water pump.

Caterpillar 3406 DITA 

good running take-out industrial engine, 420 hp / 1800 rpm, S/N 2W-6842, 18.000 running hours, SAE-1 fly wheel housing + 14" fly wheel, dry exhaust manifolds and turbo, electric start / stop panel, 24 Volt starter.

Caterpillar 3406 DITA 

marine engine, good running take-out, Y.O.M. 1993, 380hp@1800rpm, 4.000 running hours, s/n 4TB-03992, SAE-1 flywheel house + 14” flywheel, water cooled exh. manifold, thermostat hsg, 24V starter, expansion tank, air filters, double fuel injection lines.

Caterpillar 3408 DITA (elec.)

marine engine, running take-out, Y.O.M. 1997, 550hp @ 1800rpm, s/n 8RG-00366, SAE-1 flywheel housing + 14” flywheel, water cooled exhaust manifold & turbos (2x), 24V starter & alternator, sump pump, expansion tank with heat exchanger, raw-waterpump, double fuel injection lines

Caterpillar 3408 DITA (elec.)

marine engine, running take-out, Y.O.M. 1997, 550hp @ 1800rpm, s/n 8RG-00371, SAE-1 flywheel housing + 14” flywheel, water cooled exhaust manifold & turbos (2x), 24V starter & alternator, sump pump, expansion tank with heat exchanger, raw-waterpump, single fuel injection lines

Caterpillar 3412 DITA 

marine engine, running take-out, S/N 60M-08828, 720 hp / 1800 rpm, SAE-0 fly wheel housing + 18 inch" fly wheel, water cooled exhaust manifolds and turbos, air filters, expansion tank, sump pump, keel cooled, 24Volt starter.

Caterpillar 3412 DITA + ZF BW-190A (1 set)

- marine engine, NEW engine, 1350hp@2300rpm, s/n 3JK-00930, Y.O.M. 1997

- marine gearbox, s/n 59701424, ratio 2,448:1

Caterpillar 3412 DITA + ZF BW-190A (1 set)

- marine engine, NEW engine, 1350hp@2300rpm, s/n 3JK-00928, Y.O.M. 1997

- marine gearbox, s/n 59701425, ratio 2,448:1

Caterpillar 3508 DITA 

excellent running take-out electronic marine engine, 13000 running hours, 960 pk / 1600 rpm, S/N 7SM00963,air cleaners, electric panel mounted on engine,  no expansion tank, panels + controls, 24 Volt starter.

Caterpillar 3508 DITA 

running take-out marine engine, 70.000 running hours, 1005 hp / 1800 rpm, S/N 7SM00156, SAE-0 flywheel house + 18 " fly wheel, air cleaners, electric panel, expansion tank, keel cooled, water cooled exhaust manifolds and turbo's, sump pump, 24 Volt starter and alternator.

Caterpillar 3508 DITA 

marine engine/electronic, good running take-out, S/N 1TW-00242, 775 hp / 1200 rpm, SAE-0 housing + 18" fly wheel, water cooled exhaust manifolds and turbo's, computer (no governor) air filter, expansion tank, keel cooled, electric panel, 24Volt starter.

Caterpillar 3512 DITA 

marine engine, good running take-out, 41.000 running hours after overhaul, S/N 66Z-00245, 1227 hp / 1225 rpm, SAE-00 fly wheel housing + fly wheel, water cooled exhaust manifolds, air filters, expansion tank for KC, mechanical panel,  24Volt starters.

marine propulsion, NEW engine, 1750hp@1600rpm, s/n S2J00673, Y.O.M. 2009, American Bureau of Shipping Certificate, including breakdown parts kit.

marine propulsion, NEW engine, 1750hp@1600rpm, s/n S2J00674, Y.O.M. 2009, American Bureau of Shipping Certificate, including breakdown parts kit.

Cummins KTA-38MO

marine engine, excellent fully over hauled, 20 running hours, 750hp@1800rpm, S/N 33149022, SAE-0 housing + 18" fly wheel, water cooled exhaust manifolds and turbo chargers, 24Volt starters.

industrial / bow thruster, running take-out, 105PK @2400rpm, S/N A 37883,  SAE-1 housing + 14 inch fly wheel, dry exhaust manifold, keel cooled, Bosch PTO, 24 Volt starter and alternator.

industrial / marine, running take-out, 105PK @2400rpm, S/N A 23459,  SAE-2 housing + 11,5 inch fly wheel, water cooled exhaust manifold, keel cooled,  24 Volt starter.

generator engine, good running take-out, 1500rpm, S/N D-65155,  SAE-1 housing, dry exhaust manifold and turbo charger,  24 Volt starter and alternator.

marine / generator engine, running take-out, 53 KW, S/N E-23203,  SAE-1 housing, + fly wheel, water cooled exhaust manifold, expansion tank, heat exchanger, raw water pump, 24 Volt starter and alternator.

marine / generator engine, running take-out, 1500rpm, S/N E-67568,  SAE-1 housing, + fly wheel, water cooled exhaust manifold, expansion tank, heat exchanger, raw water pump, 24 Volt starter and alternator.

marine engine, good running take-out, 300pk @1800rpm, S/N H-67728,  SAE-1 housing + 14 inch fly wheel, water cooled exhaust manifold, dry exhaust turbo charger, charge air cooler + Jabsco raw water pump, expansion tank for KC, 24 Volt starter.

marine / industrial engine, excellent running take-out, 329pk @2000rpm, S/N H-63727,  SAE-1 housing + fly wheel, dry exhaust manifold and turbo, 24 Volt starter and alternator.

industrial engine, very good running take-out, 100hp@1800rpm, S/N 4A-113408, SAE-1 fly wheel housing with 14" fly wheel, variable speed governor, dry exhaust manifold, HV-7 injectors, 24 Volt starter.

marine engine, good running take-out, 165hp@1800rpm, SAE-1 fly wheel housing, variable speed governor, dry exhaust manifold, HV7 injectors.

crane engine, good running take-out, 120hp@1800rpm, S/N 1043-5000, Model # 4A-185747, SAE-2 fly wheel housing and fly wheel, variable speed governor, dry exhaust manifold, 12 Volt starter, 4 valve head, N55 injectors, fan mounted.

industrial engine, good running take-out, 120hp@1800rpm, S/N 4A-122190, SAE-3, flex. plate fly wheel, dry exhaust manifold.

marine / industrial engine, running take-out / core, 180hp@1800rpm,  model nr. 1063-5000, SAE-2 fly wheel housing + fly wheel, dry exhaust manifold, 4-valve head, oil bath air cleaners, variable speed governor, 24 Volt starter.

industrial core engine, running take-out, 180pk@1800rpm,  model nr. 1063-1000, SAE-2 housing and fly wheel, dry exhaust manifold, 2-valve head, variable speed-constant speed governor, N 55 injectors, 24 Volt starter.

industrial engine, running take-out, 180hp@1800rpm, S/N 6VA-117619, SAE-2 fly wheel housing with 11.5 inch fly wheel, dry  exhaust manifolds, fan + fan drive, variable speed governor, 24Volt starter.

industrial engine, running take-out, 180hp@1800rpm, S/N 6VA-117609, SAE-2 fly wheel housing with 11.5 inch fly wheel, dry  exhaust manifolds, fan + fan drive, variable speed governor, 24Volt starter.

marine engine, running take-out / core, 180hp@1800rpm, S/N 6VA-30471, SAE-1 fly wheel housing with 14 inch fly wheel, water cooled exhaust manifolds, air silencers, variable speed governor, no starter.

industrial / generator engine, S/N 6VW-001494, Model # 7064-7002.

Detroit Diesel 8V-71N 

marine engine, good runner, 240hp@1800rpm, S/N 8VA-15406, Model # 7082-3000, SAE-1 fly wheel housing, 14” fly wheel, air silencers, water cooled exhaust manifolds, variable speed governor, 24 Volt starter.

marine engine, running take-out, 240hp @1800rpm, S/N 8VAW-3727, Model # 7083-7000, SAE-2 Allison fly wheel housing, water cooled exhaust manifold, variable speed governor, expansion tank for KC, Farr filter, 24 Volt starter.

marine engine, running take-out/core, 240hp @1800rpm, S/N 8VA-169843, Model # 7083-7000, SAE-1 fly wheel housing with 14" fly wheel, water cooled exhaust manifolds, variable speed governor, expansion tank for KC, 24 Volt starter.

marine engine, good running take-out, 240hp @1800rpm, S/N 8VA-308439, Model # 7083-7399, SAE-1 fly wheel housing with 14" fly wheel, water cooled exhaust manifolds, variable speed governor, new style block and rocker covers, 24 Volt starter.

marine core engine, running take-out, 240hp @1800rpm, S/N 8VA71-74121, Model # LB-7206, SAE-1 fly wheel housing + 14inch fly wheel, water cooled exhaust manifolds, variable speed governor, new style block 24Volt starter.

marine core engine, running take-out, 240hp @1800rpm, S/N 8VA-387939, Model # 7083-387939, SAE-1 fly wheel housing + 14inch fly wheel, dry exhaust manifolds, variable speed governor + N65 injectors, new style rocker covers, 24Volt starter and alternator.

marine engine, excellent running take-out, 380hp@1800rpm, S/N 12VA-33774, Model # 7122-003000, SAE-1 fly wheel housing, 14” fly wheel, HE tank + Jabsco pump + piping, 24 Volt starter (2x), water cooled exhaust manifolds, variable speed governor + N60 injectors, marine gear oil cooler.

marine core engine, needs overhaul, 360hp@1800rpm, S/N 12VA-42321, Model # 7123-7000, SAE-1 fly wheel housing, 14” fly wheel, water cooled exhaust manifolds, variable speed governor, HE cooling system, no starter.

core marine engine, needs overhaul, 360hp@1800rpm, S/N 12VA-73384, Model #7123-7000, SAE-1 fly wheel housing, 14” fly wheel, water cooled exhaust manifolds, marine gear oil cooler and oil filters, variable speed governor, 24 volt starter.

marine engine, running take-out, 360hp@1800rpm, SAE-1 fly wheel housing, 14” fly wheel, expansion tank, air silencers, keel cooled, water cooled exhaust manifolds, variable speed governor, 24 Volt starter. 

marine engine, running take-out, 360hp@1800rpm, SAE-1 fly wheel housing, 14” fly wheel, expansion tank, air silencers, keel cooled, water cooled exhaust manifolds, variable speed governor 24 Volt starter. 

marine engine, running take-out, 360hp@1800rpm, S/N 12VA-6790, SAE-1 fly wheel housing, 14” fly wheel, keel cooled, no tank, water cooled exhaust manifolds, variable speed governor 24 Volt starter. 

marine engine, running take-out, 360hp@1800rpm, S/N 12VA-87376, SAE-1 fly wheel housing, 14” fly wheel, keel cooled, water cooled exhaust manifolds, variable speed governor, air silencers, new style block, 24 Volt starter. 

marine engine, running take-out, 360hp@1800rpm, S/N 12VA-76021, SAE-1 fly wheel housing, 14” fly wheel, keel cooled-no tank, water cooled exhaust manifolds, variable speed governor, new style block, 24 Volt starter. 

marine engine, running take-out, 480hp@1800rpm, S/N 16VA-5819, SAE-0 fly wheel housing, 18” fly wheel, keel cooled, water cooled exhaust manifolds, variable speed governor, new style block, 24 Volt starter. 

marine engine, running take-out / core, 480hp@1800rpm, S/N 16VA-7291, SAE-0 fly wheel housing, 18” fly wheel, keel cooled, water cooled exhaust manifolds, variable speed governor, new style block, 24 Volt starter. 

generator-set, good running take-out / core unit, 105KW @1500rpm, S/N 4A-287392, Model #1043-7305, SAE-1 fly wheel housing and 14" fly wheel, dry exhaust manifold and turbo,   dydraulic speed governor, keel cooled, 24 Volt starter.

generator / industrial engine, running take-out, 200hp @1500rpm, S/N 6A-432955, Model #1063-7305, SAE-1 fly wheel housing and Delco fly wheel, dry exhaust manifold and turbo, raw water pump on frame, Woodward dydraulic speed governor, air filter, KC expansion tank, mechanical panel, air starter.

generator / industrial engine, running take-out, 200hp @1500rpm, S/N 6A-433004, Model #1063-7305, SAE-1 fly wheel housing and Delco fly wheel, dry exhaust manifold and turbo, raw water pump on frame, Woodward dydraulic speed governor, air filter, KC expansion tank, mechanical panel, air starter.

marine / industrial engine, running take-out, 440hp @1800rpm, S/N 12VA-67941, SAE-1 fly wheel housing + 14"  fly wheel, dry exhaust manifold and turbos, variable speed governor, keel cooled, no tank, 24 Volt starter.

marine / industrial engine, running take-out, needs overhaul, 300hp@1800rpm, S/N 8VA-447280, model #7083-7601, SAE-1 fly wheel housing, 14” fly wheel, variable speed governor, dry exhaust manifolds and turbo charger, 24 Volt starter.

marine engine, fully over hauled, 425hp@2300rpm, S/N 8VAW-0616, model #7082-7300, SAE-2 fly wheel housing + Allison fly wheel, variable speed governor, water cooled exhaust manifolds and turbo chargers, HE cooling system, 24 Volt starter and alternator.

marine engine, running take-out / core, 240hp@1800rpm, S/N 6VF-085832, Model #8063-7000, SAE-1 fly wheel housing, 14” fly wheel, variable speed governor, water cooled exhaust manifolds, keel cooled-no tank, 24 Volt starter.

industrial engine, running take-out, 300hp@1800rpm, S/N 8VF-050821, Model #8083-7000, SAE-1 fly wheel housing, 14” fly wheel, variable speed governor, dry exhaust manifolds, compressor and hydraulic pump, fan drive with fan, 24 Volt starter.

generator engine, good running take-out, 380hp @1800rpm, S/N 8VF-154620, Model# 8083-7305, SAE-1 fly wheel house with 14" fly wheel, HE tank + Jabsco + piping, dry exhaust manifolds and turbo, hydraulic Woodward governor, 24 Volt starter.  

running take-out / core unit,  S/N 8VF-124466, model #8083-7400, SAE-1 fly wheel housing, 14" fly wheel, water cooled exhaust manifolds, two dry turbo chargers, variable speed governor, keel cooled, new style block, 24 volt starter.

running take-out, 445hp@2100rpm, S/N 8VF-144452, model #8087-7899, SAE-1 truck fly wheel housing and fly wheel, dry exhaust manifolds and turbo chargers, limited speed governor, keel cooled, 24 volt starter and alternator.

running take-out, needs overhaul,  540hp@1800rpm, S/N 12VF-12071, model #8122-7402, SAE-0 fly wheel housing, 18" fly wheel, water cooled exhaust manifolds and turbo's, variable speed governor, 24 volt starter and Leece Neville alternator.

running take-out, 850hp@2100rpm, S/N 12VF-011952, model #8123-7K00, SAE-1 fly wheel housing, 14" fly wheel, dry exhaust manifolds and turbo's, new style block, 24 volt starter.

industrial / compressor, running take-out,  S/N 12VF-09613, model #8123-7K00, SAE-1 fly wheel housing, 14" fly wheel, dry exhaust manifolds and dry turbos, 24 volt starter.

industrial / compressor, running take-out,  S/N 12VF-09782, model #8123-7K00, SAE-1 fly wheel housing, 14" fly wheel, dry exhaust manifolds and dry turbo's.  24 Volt starter. 

industrial engine, running take-out,  850hp@2100rpm, S/N 12VF-011953, model #8123-7K00, SAE-1 fly wheel housing, 14" fly wheel, dry exhaust manifolds and dry turbo's.  24 Volt starter. 

industrial / marine engine, good running take-out, 1200hp @ 2300rpm, S/N 16VF-005765, model #8163-7300, SAE-1 housing with 14" fly wheel, water cooled exhaust manifolds, dry turbo chargers, hydraulic governor, HE cooled with Jabsco pumps, 24 Volt starter and alternator. 

marine engine, running take-out / core, 720hp @ 1800, S/N 16VF-9425, SAE-0 housing with 18" fly wheel, water cooled exhaust manifolds and turbo chargers, variable speed governor, keel cooled, 24 Volt starter and alternator. 

marine core engine, running take-out, 700hp@1800rpm, S/N 12E-1731, model #9122-7000, SAE-0 fly wheel housing and 18” fly wheel, water cooled exhaust manifolds, expansion tank for KC, variable speed governor, marine gear oil cooler, 24 Volt starters.

marine engine, running take-out, needs overhaul, 700hp@1800rpm, S/N 12E-2259, SAE-0 fly wheel housing and 18” fly wheel, water cooled exhaust manifolds, variable speed governor, 24 Volt starters.

marine engine, good running take-out, 700hp@1800rpm, S/N 12E-10941, SAE-0 fly wheel housing and 18” fly wheel, water cooled exhaust manifolds, variable speed governor, expansion tank for KC, 24 Volt starters.

marine engine, good running take-out, 700hp@1800rpm, S/N 12E-2380, SAE-0 fly wheel housing and 18” fly wheel, water cooled exhaust manifolds, variable speed governor, expansion tank for KC, 24 Volt starters.

marine engine, running take-out, need over haul, 900hp @1800rpm, S/N 12E-8887, Model # 9123-7300, SAE-0 fly wheel flange plus 18” fly wheel, variable speed governor, dry exhaust manifolds and turbo chargers, expansion tank for KC, 24 Volt starters and alternators.

marine core engine, 1000hp @1800rpm, S/N 12E-9733, Model # 9122-7301, SAE-0 fly wheel flange plus 18” fly wheel, variable speed governor, water cooled exhaust manifolds, dry turbo chargers, expansion tank for KC, 24 Volt starters and alternators.

marine engine, 940hp @1800rpm, S/N 12E-7301, SAE-0 fly wheel flange plus 18” fly wheel, variable speed governor, water cooled exhaust manifolds, dry turbo chargers, expansion tank, keel cooled, 24 Volt starters and alternators.

good running take-out / core engine, 1460hp @1800rpm, S/N 16E-11644, Model # 9162-7301, SAE-0 fly wheel flange plus 18” fly wheel, hydraulic speed governor, shielded exhaust manifolds and turbo's, expansion tank for KC, 24 Volt starters and alternators.

good running take-out / core engine, 1300hp @1800rpm, S/N 16E-8913, Model # 9163-7306, SAE-0 fly wheel flange plus 18” fly wheel, dry exhaust manifolds and turbo's, keel cooled, Woodward hydraulic governor, 24 Volt starters and alternators.

good running take-out / core engine, 1460hp @1800rpm, S/N 16E-13511, Model # 9162-7301, SAE-0 fly wheel flange plus 18” fly wheel, dry exhaust manifolds and turbo's wrapped, keel cooled, excluding expansion tank, variable speed governor, 3/4" crankshaft + fly wheel, 24 Volt starters and alternator.

good running take-out, marine engine, 20.000 running hours, 326hp@1200rpm, S/N 5.968.975, fly wheel house and fly wheel, dry exhaust manifold and turbo, sump pump, air filter, expansion tank, heat exchanger, raw water pump, electric panel, 24 Volt starter.

good running take-out, marine engine, 450hp@1650rpm, S/N 6.639.623, dry exhaust manifold and turbo, sump pump, expansion tank, heat exchanger, raw water pump, 24 Volt starter.

generator engine, good running take-out, 15.000 running hours, 556 KVA@1800rpm, S/N 6.639.747, on steel frame, with radiator, electric panel.

marine engine, 535hp@1500rpm, S/N 4.982.927, old model, 24 Volt starter and alternator.

industrial air cooled engine, running take-out, 200hp@2500rpm, S/N 6.277.608. SAE-1 fly wheel house + 14" fly wheel, no 24 Volt starter and alternator.

marine core engine, 260kw @ 1200rpm, S/N 6.120.230, dry exhaust manifolds and turbos, air started cylinder heads, electronic speed governor, sump pump, air filters, keel cooled, radiator cooled, heat exchanger plate, double walled injection lines.

marine engine, running take-out, 358kw @ 1500rpm, S/N 5.772.474, fly wheel house + fly wheel, dry exhaust manifolds and turbos, keel cooled, 24 Volt starter and alternator.

marine engine, running take-out, 358kw @ 1500rpm, S/N 5.772.442, fly wheel house + fly wheel, dry exhaust manifolds and turbos, keel cooled, 24 Volt starter and alternator.

marine engine, running take-out, 405kw @ 1650rpm, S/N 6.639.926. 

industrial engine, NEW,  173Kw@2300rpm, S/N 10201358, electronic unit.

industrial engine, virtually new, 50 running hours, 173Kw@2300rpm, S/N 10112301, electronic unit.

water jet propulsion system, model #56-S-62.NEW

PT790

water jet propulsion system, model #56-S-62.NEW

marine engine, excellent running take-out, Y.O.M. 1992, 820hp @ 2300rpm, 1000 running hours, s/n 473.6709.116A301, SAE-1 flywheel hsg + 14“ flywheel, sump pump, sea water pump, air filters, water cooled exh. man. & turbos, heat exchanger, 24V starter & alternator, remote mounted oil filters.

marine engine, good running take-out, Y.O.M. 1998, 510hp @ 2300rpm, 10.000 running hours, s/n 433.8906.049A301, SAE-1 flywheel hsg + 14“ flywheel, sump pump, sea water pump, air filters, water cooled exh. man. & turbos, heat exchanger, 24V starter & alternators.

marine engine, good running take-out, Y.O.M. 1998, 510hp @ 2300rpm, 10.000 running hours, s/n 433.8906.047A301, SAE-1 flywheel hsg + 14“ flywheel, sump pump, sea water pump, air filters, water cooled exh. man. & turbos, heat exchanger, 24V starter & alternators.

marine engine, excellent running take-out, 680hp@2300rpm, S/N 433.836.5 0 67 A 301, SAE-1 flywheel housing + 14"flywheel, water cooled exhaust manifolds and turbo's, air filters, expansion tank with heat exchanger, raw water pump, double walled injection lines, electric panel, 24 Volt starter.

generator engine, good running take-out, 230KW@1500rpm, S/N 355458, SAE-1 housing + special fly wheel, water cooled exhaust manifolds and dry exhaust turbo charger, 24 Volt starter and alternator.

marine generator engine, excellent running take-out, 164hp@1500rpm, S/N 281864, SAE-1 housing + fly wheel, water cooled exhaust manifolds, sump pump, air filter, keel cooled, 24 Volt starter and alternator.

Generator set, excellent running take-out, 200 running hours, 1000KVA@1500rpm, S/N 558269. 

MWM D 226-6

generator set, excellent running take-out, 80 kVA @ 1500 rpm, Y.O.M. 1988,          s/n 266.6.217.201, low running hours, on frame with gen. AVK DKBN42/100-4

MWM TBD 234 V16

marine engine, running take-out, 780 Kw@2200rpm, S/N 234.16.01090, water cooled exhaust manifolds and turbos,air filters, expansion tank, heat exchanger, raw water pump, double walled injection lines, 24 Volt starter.

NEW generator / industrial engine 450hp int. @2100rpm, S/N 6510112, SAE-1 housing + 14 inch fly wheel, synchronizing motor + control box, radiator incl. expansion tank + air cooler, air cleaner 

overhauled marine electronic engine, zero hours after overhaul, 600hp @1800rpm, S/N 7000326, SAE-1 housing + 14 inch fly wheel, water cooled exhaust manifolds and turbos, electronic speed governor, control box, 24 Volt starter.

marine / generator engine, running take-out, 1500rpm, water cooled exhaust manifold and dry turbo, keel cooled, 24Volt starter and alternator.

marine engine, good running take-out, 296hp @ 1800rpm, s/n Variant M20S, motor n° 5295-405, SAE-1 flywheel hsg. + 14” flywheel, water cooled exhaust manifolds, dry turbocharger, 24V starter & alternator, Jabsco raw-water pump, expansion tank with heat exchanger.

Volvo Penta MD-100 A 

marine engine, good running take-out, 135ho@1800rpm, S/N 825737811, water cooled exhaust manifold,expansion tank, heat exchanger, raw water pump, 24 Volt starter and alternator.

Volvo Penta TAMD-63 (2 UNITS)

marine pleasure craft, excellent running take-out, 2.000 running hours since new, built together with Twin Disc MG-5061, ratio 2:1, 370hp@2800rpm, S/N 2062222668 / 868735, gearbox S/N 5DG-009 and S/N 2061111667 / 868735, gearbox S/N 5DV-592, HE tank with raw water pump, water cooled exhaust manifold + turbo charger, vibration dampers, instrument panel 2 x per engine including wiring, water cooled exhaust mufflers, throttle controls with cables, flexible coupling propeller shaft, propellers.

Volvo Penta TD 610-V 

industrial core engine, S/N 983 /130143, SAE-2 fly wheel housing with 11.5"  fly wheel, dry exhaust manifold, compressor, 24 Volt starter and alternator.  

Volvo Penta TD 610-G

industrial core engine, 65KVA @ 1500rpm, S/N TD610G / 020 / 75018, dry exhaust manifold, no expansion tank.

Volvo Penta TMD 100 C 

marine engine, excellent running take-out, 3000 running hours after overhaul, 175KW @ 1800rpm, S/N 867782,  Motor nr. 1101010366, SAE-1 fly wheel housing + 14" fly wheel, water cooled exhaust manifold and turbo, sump pump, air filter, expansion tank, heat exchanger, raw water pump, 24 Volt starter and alternator.

marine engine, running take-out, 800hp @ 1200rpm, S/N 336785, Spec. Nr. G-39555, water cooled exhaust manifold, air starter. 

ENGINES:

GOOD FOR PARTS 

marine engine, 360hp @ 1800rpm, S/N 33B-4649,  SAE-0 fly wheel house with 18" fly wheel,  water cooled exhaust manifolds and turbo chargers, raw water pump for air cooler, 24 Volt starters

marine engine, 1000hp@380rpm, S/N 5.074.769. 

marine engine, good for parts, Y.O.M. 1978, 326hp@1250rpm, s/n 5.968.976, damaged on crankshaft, camshaft 0400-6046, flywheel housing + flywheel, dry exhaust manifold and turbo, 24V starter, sump pump, air filters, expansion tank, heat exchanger, raw-waterpump Steimel KB125/3 LS, electric panel. 

S/N 6.120.249, 260kw @ 1200rpm, dry exhaust manifolds and turbo, air started cylinder heads, electric speed governor, sump pump, air filters, keel cooled, radiator cooled, heat exchanger plate, double walled injection lines.

S/N 6.120.250, 260kw @ 1200rpm, dry exhaust manifolds and turbo, air started cylinder heads, electric speed governor, sump pump, air filters, keel cooled, radiator cooled, heat exchanger plate, double walled injection lines.

MWM TBD 484-6U

marine engine, 1100hp@375rpm, S/N 15146-007.

CRANKSHAFTS:

reconditioned, overall 0,025” undersize, s/n engine 9PW-00592.     

NEW standard dimensions.

standard dimensions, checked by van Zetten. 

con. rod and mainshaft 0,010" under size, checked by van Zetten.

S/N 12VA-82318, main journals standard, crank pins 0,010" under size, 10 bolt type, checked by van Zetten.

crank pins 0,010" under size, 10 bolt type, checked by van Zetten.

complete crankshaft, main journals and crankpins 0,010" under size, checked by van Zetten.

main journals and crankpins 0,010" under size, checked by van Zetten.

S/N 12VF-3018, model#8123-7400,main journals and crankpins 0,010" under size, checked by van Zetten.

rear crankshaft std. P/N 235029866, checked by van Zetten.

front crankshaft std. P/N 8926421 R, checked by van Zetten.

reconditioned, complete crankshaft std. motor nr. 12VF-9908, checked by van Zetten.

S/N 16VF-10189, model# 8162-7402, standard dimensions, rear, polished, checked by van Zetten.

model# 8162-3401, P/N rear (LH) 23502990, P/N front (LH) 8927722, 0,010" under size, checked by van Zetten.

Standard front / rear crankshaft, only half part, S/N 16E-5437, 5/8 bolt

Standard front / rear crankshaft, only half part, S/N 16E-5437, 5/8 bolt

700hp/1800rpm, S/N 12E-4867, model# 9122-7000, 5/8 bolt, complete front + rear crankshaft, standard size, P/N 8927994.

model# 9163-7306, front + rear crankshaft, standard size, P/N 8927994.

reconditioned with Lloyds Register Certificate, undersize, checked by van Zetten.

reconditioned with Lloyds register certificate, S/N 6.919.903 standard size, checked by van Zetten.

excellent condition, MRC report, with Lloyds Register certificate, new gear, new flange, S/N 6.120.404, standard size, checked by van Zetten.

CYLINDER-BLOCKS:

overhauld, S/N 6A-459307, liners standard, checked by van Zetten. 

S/N 6VW-1027, model#7064-7002, cyl.bore 0,010" under,  checked by van Zetten. 

S/N 8VA-125898, model#7083-7000, 240hp/1800rpm, cylinder and bearing bore: std.,  checked by van Zetten. 

S/N 12VA-44124, model#7122-7008, 360hp/1800rpm,  checked by van Zetten. 

rear block, over hauled, new style, S/N 16VA-12545, model#7163-7000, main bearings std., cyl.bore 0,010" under size, checked by van Zetten.

front block, new style, S/N 16VA-12545, model#7163-7000,main bearings std., cyl.bore 0,010" under size, checked by van Zetten.

S/N 6VF-135178, model#8067-7427,main bearing and cyl.bore std., checked by van Zetten.

S/N 6VF-24944, model#8067-7700, main bearing and cyl.bore std., checked by van Zetten.

S/N 6VF-050378, good condition, model#8067-7800, standard dimensions, checked by van Zetten.

S/N 16VF-14608,model#8162-7402, std. dimensions, Front block P/N 8923319, checked by van Zetten.

S/N 12E-4867,model#9122-7000,700hp/1800rpm,  front & rear , checked by van Zetten.

S/N 16E-5437,model#9163-7000,  checked by PT.

S/N 16E-8908,model#9163-7306, std. dimensions, Front block P/N 5199560, checked by van Zetten.

bedplate reconditioned / overhauled, 1100hp @ 900rpm,  Lloyds Register of shipping. cert. nr. 9855248, checked by van Zetten.

4 x reconditioned cylinder heads. 

short block, S/N 7.378.425, over hauled, 1800rpm, std. main bearing bore, liner surfaces are machined, checked by van Zetten.

reconditioned cylinder block, s/n 7.378.425, line-bored, liner surfaces machined 

reconditioned with LRS, block is standard overall, 1222hp@1800rpm, S/N 6.536.372, Line bored, landing surfaces machined. 

S/N 616.08.001033, NEW  SAE-0 fly wheel house, front cover, balance shaft.

S/N 234.12.01673, 383 KW @ 1500 rpm,  checked by van Zetten.

GEARBOXES:

marine gear, inspected, excellent running take-out, S/N 10474 A, 840hp@1800rpm, ratio 4:1, no SAE flange, flex. coupling + 18 inch drive ring, mechanical control.

marine gear, inspected, good running take-out, S/N 97635A, 600hp@1800rpm, ratio 4,5:1, no SAE flange, 14" flex. coupling, brackets, PTO (V-belt)

marine gear, inspected, good running take-out, S/N 26879, 240 hp @ 1800 rpm, ratio 4,5:1

marine gear, inspected, good running take-out, S/N 26879, 240 hp @ 1800 rpm, ratio 4,5:1

marine gear, inspected, excellent running take-out, 1765KW@980rpm, ratio 5,37:1, S/N 12611 spec.# IDN: 935427.

marine gear, inspected, excellent running take-out, 1490KW@930rpm, ratio 5,3684:1, S/N 11482 spec.# IDN: 869090.

marine gear, inspected, 565hp@1225rpm, ratio 3:1, S/N 11 / 210 / 433, Spiroflex EJD – 110 flex. coupling.

marine gear, inspected good running take-out, 450hp@1800rpm, ratio 4:1, S/N 3 / 210 / 089, 14" flex. coupling, oil cooler, PTO, electric clutch lever.

marine gear, inspected good running take-out, 450hp@1800rpm, ratio 4:1, S/N A / 210 / 088 14" flex. coupling, oil cooler, PTO, electric clutch lever.

marine gear, running take-out, 565hp @ 1225rpm, ratio 3:1, Y.O.M. 1971,                  s/n 3/210.324, bypass oil cooler, electric controls, incl. Spiroflex coupling: 

1638 EJD 110 56 [0.5] MD 1.09 9256 / 1645 EJD 110 56 [0.5] MD 1.08 9256

inspected, 504hp@1800rpm, ratio 5,335:1, S/N 21802. CP. application.

marine gear, excellent running take-out, 370pk@1800rpm, ratio 5,0:1, S/N 16882, SAE-1 flange.

marine gear, excellent running take-out, 370pk@1800rpm, ratio 5,0:1, S/N 15116, SAE-1 flange.

Masson NFC 

marine gear, inspected good running take-out, 513hp@1800rpm, ratio 4,92:1, S/N 21570,   no SAE flange, Centamax  flex coupling type 3500 +18” drive ring.

Masson NFC 

marine gear, inspected excellent running take-out, 513hp@1800rpm, ratio 4,92:1, S/N 25383   

Masson NFC 

marine gear, inspected good running take-out, 513hp@1800rpm, ratio 4,1:1, S/N 24320, SAE-1 housing, 14" flex. coupling, by pass oil cooler, PTO. 

Masson NFC 

marine gear, inspected good running take-out, 513hp@1800rpm, ratio 4,1:1, S/N 24321, SAE-1 housing, 14" flex. coupling, by pass oil cooler, PTO. 

Masson NGB

marine gear, running take-out, ratio 5:1, S/N 10760, SAE-0 flange with 18 inch rubber pin coupling, oil cooler.

Masson RSD 281 

marine gear,inspected good running take-out, 504hp@1800rpm, ratio 5,33:1, S/N 20653, SAE-0 flange.

Masson RSD 281 

marine gear, good running take-out, 570hp@1800rpm, ratio 4,704:1, S/N 21062, SAE-0 flange + 14" flex. coupling Vulastic-L, hydr. pump.

Masson RSD 401 

marine gear, inspected good running take-out, 830hp@1800rpm, ratio 4,625:1, S/N 22723, SAE- 0 flange, 18” Vulkan Vulastic L 34 flex. coupling with aluminium ring.

Masson RSD 471 

marine gear, inspected excellent running take-out, 812hp@1800rpm, ratio 4,498:1, S/N 22247, SAE- 0 flange, 18”  coupling with aluminium ring.

Masson RSD 571 

marine gear, inspected, running take-out, 1020KW@1800rpm, ratio 5,354:1, S/N 19160, no SAE flange with 18"  Stromag flex. coupling, brackets, oil cooler.

Masson RSD 701 

marine gear inspected, good running take-out, 1488hp@1800rpm, ratio 5,538:1, S/N 20565, 18" flex. coupling, PTO.

marine gear, inspected 170hp@1500rpm, ratio 5:1, S/N 151-40296, flex. coupling, brackets, oil cooler, stand alone unit.

marine gear, inspected 1540hp@1100, ratio 2:1, S/N 38055, rotation right / right.

marine gear, inspected good running take-out, 592hp@1800rpm, ratio 4,48:1,   S/N 51844, SAE-1 flange, 14” flex. coupling.

marine gear, inspected good running take-out, 331KW@1800rpm, ratio 5,435:1, S/N 52905, no SAE flange, 18” flex. coupling, PTO connection, brackets, no oil cooler.

marine gear, inspected good running take-out, 540KW@1800rpm, ratio 4,48:1, S/N 61062, SAE-0 flange, 18” flex. coupling and aluminium ring.   

marine gear, inspected good running take-out, 537KW@1800rpm, ratio 6,048:1, S/N 66621, SAE-0 flange, 18” flex. coupling.   

marine gear, inspected running take-out, 808KW@1800rpm, ratio 4,577:1, S/N 55204, no flange, 14” flex. coupling, Valastic 2x260 and aluminium ring, oil cooler, brackets, PTO with V-disc.    

marine gear, inspected good running take-out, 530KW/720hp@1800rpm, ratio 4,577:1, S/N 56343, SAE-0 flange + 18” flex. coupling with aluminium ring, oil cooler, brackets.    

marine gear, running take-out, 800hp @ 1800rpm, ratio 5,042:1, Y.O.M. 1993, s/n 57164, Left - IN, Right - OUT, SAE-0 flange + flex. coupling, 18” aluminum drive ring.   

marine gear, inspected running take-out, 810kw @ 1800rpm, ratio 5,05:1, S/N 55913, SAE-0 flange + 18 inch flex. coupling with aluminium ring, PTO drive.

marine gear, inspected good running take-out, 537kw @ 1200rpm, ratio 5,05:1, S/N 56672, SAE-0 flange + 18 inch flex. coupling. by pass oil cooler, mechanical controls.

marine gear, 809kw@1800rpm, ratio 5,05:1, S/N 56756. 

marine gear, inspected good running take-out, 1300hp @ 1800rpm, ratio 5,043:1, S/N 53747,  no SAE flange, flex. Vulkan EZR 1022

Reintjes WAF 1590

marine gear, inspected running take-out, 320pk @ 640rpm, ratio 1,815:1, S/N 111-34457, SAE flens, flex. coupling, cooler. 

marine gear, inspected 1026hp@1800rpm, ratio 5:1, S/N 36755, oil cooler, brackets, stand alone unit. 

marine gear, inspected good running take-out, 2625KW@900rpm, ratio 5,947:1.

marine gear, inspected 774hp@1800rpm, ratio 5:1, S/N 110-35406, flex. coupling, brackets, by-pass oil cooler.    

2 x pieces marine gear inspected, 544hp@1800rpm, ratio 5,44:1, S/N KT 8031/77, flex. coupling EZ 95S, electrical switch, oil cooler.

marine gear inspected, S/N 643690, arrangement nr. X-9681, Spec. nr. DDA nr 5132201

NEW, 210/245hp @ 1800/2100rpm, ratio 2,82:1, S/N 9603010, SAE-1 flange + 14"  rubber block drive with aluminum ring,  brackets, oil cooler

NEW, 300/344hp @ 1800/2100rpm, ratio 3:1, S/N 9602009, SAE-1 flange + 14"  rubber block drive with aluminum ring,  brackets, oil cooler

NEW, 300/344hp @ 1800/2100rpm, ratio 3:1, S/N 9602010, SAE-1 flange + 14"  rubber block drive with aluminum ring,  brackets, oil cooler

NEW, 300/344hp @ 1800/2100rpm, ratio 3:1, S/N 9602008, SAE-1 flange + 14"  rubber block drive with aluminum ring,  brackets, oil cooler.

NEW marine gear inspected, 700 / 971hp@1800 / 2100rpm, ratio 1,5:1, S/N 9A-0353, SAE-1 flange + 14” rubber block drive and steel ring.

NEW marine gear inspected, 700 / 971hp@1800 / 2100rpm, ratio 1,5:1, S/N 9A-0434, SAE-1 flange + 14” rubber block drive and steel ring.

NEW marine gear inspected, 600hp@1800rpm, ratio 5,714:1, S/N 9A-0516, SAE-1 flange + 14” rubber block drive and steel ring.

NEW marine gear inspected, 600hp@1800rpm, ratio 5,714:1, S/N 9A-0517, SAE-1 flange + 14” rubber block drive and steel ring.

NEW marine gear inspected, 788hp@1800rpm, ratio 5,714:1, S/N 9A-0515, SAE-1 flange + 14” rubber block drive and steel ring.

marine gear inspected, good running take-out, 240hp@1800rpm, ratio 3,39:1, S/N 309958,  SAE-2 flange, 11,5 inch  rubber block drive.

marine gear inspected, good running take-out, 240hp@1800rpm, ratio 1,454:1, S/N 559103,  SAE-1 flange, 14 inch  rubber block drive and aluminium ring.

marine gear inspected, good running take-out, 240hp@1800rpm, ratio 2:1, S/N 570970,  SAE-1 flange, oil cooler, 14 inch  rubber block drive and aluminium ring.

marine gear inspected, good running take-out, 240hp@1800rpm, ratio 3,39:1, S/N 309958, SAE-1 flange + 14" rubber block drive with aluminium ring.

marine gear inspected, running take-out, 235hp@1800rpm, ratio 2:1, S/N 5V-4135, SAE-1 flange + 14" rubber block drive with aluminium ring.

NEW marine gear 228hp@1800rpm, ratio 2,48:1, S/N 5EU-735, spec. nr. S.10811, SAE-1 flange + 11.5" rubber block drive with aluminium ring, oil cooler.

NEW marine gear 228hp@1800rpm, ratio 2,48:1, S/N 5EU-736, spec. nr. S.10811, SAE-1 flange + 11.5" rubber block drive with aluminium ring, oil cooler.

marine gear good running take-out, 180hp@1800rpm, ratio 4,95:1, S/N 5N-5380, SAE-1 flange + 14" rubber block drive and aluminium ring.

marine gear, running take-out, 240hp@1800rpm, ratio 2,95:1, S/N 37243, SAE-1 flange + 14" rubber block drive, oil cooler.

Twin Disc MG-509

Twin Disc MG-509

Twin Disc MG-509

Twin Disc MG-509

marine gear inspected, good running take-out, 300hp@1800rpm, ratio 4,95:1, S/N 3P-6215,  SAE-1 flange + 14" rubber block drive and aluminium ring.

marine gear inspected, good running take-out, 365hp@1800rpm, ratio 3,5:1, S/N 559235,  SAE-1 flange + 14" rubber block drive.

marine gear inspected, running take-out, 365hp@1800rpm,  SAE-1 flange + 14" rubber block drive and aluminium ring.

marine gear inspected, good running take-out, 360hp@1800rpm, ratio 4,5:1, S/N 3D-9505, SAE-0 flange with 14” rubber block drive and aluminium ring.

marine gear inspected, good running take-out, 360hp@1800rpm, ratio 2:1, S/N 377478, SAE-1 flange with 14” rubber block drive and aluminium ring.

marine gear inspected, good running take-out, 360hp@1800rpm, ratio 2:1, S/N 377479, SAE-1 flange with 14” rubber block drive and aluminium ring.

marine gear inspected, running take-out, 360hp@1800rpm, ratio 4,5:1, S/N 592048, SAE-1 flange with 14” rubber block drive and aluminium ring.

marine gear inspected, running take-out, 360hp@1800rpm, ratio 4,5:1, S/N 374504, SAE-0 flange with 14” rubber block drive.

marine gear inspected, excellent condition, 360hp @ 1800rpm, ratio 4,5:1, s/n 3C-0768, SAE-1 flange + 14” alum. drive ring.

marine gear, good running take-out, 360hp @ 1800rpm, ratio 5,16:1, s/n 5C-4557X, spec. n° 34358, SAE-1 flange + rubber block drive, 14” aluminum drive ring.

marine gear, good running take-out, 360hp @ 1800rpm, ratio 5,16:1, s/n 5D-7675, spec. n° S-3849, SAE-1 flange + rubber block drive, 14” aluminum drive ring.

marine gear, excellent running take-out, 360hp @ 1800rpm, ratio 4,50:1, s/n 5J-8210, spec. n° S-4298, SAE-1 flange + rubber block drive, 14” aluminum drive ring, completely dismantled and build up with some new parts.

marine gear inspected, good running take-out, 380hp@1800rpm, ratio 5,16:1, S/N 5N-3093, SAE-1 flange, 14” rubber block drive and aluminium ring.

marine gear inspected, good running take-out, 380hp@1800rpm, ratio 5,16:1, S/N 5R-0348, SAE-1 flange, 14 inch rubber block drive and aluminium ring. 

marine gear inspected, good running take-out, 380hp@1800rpm, ratio 4,5:1, S/N 5W-5806, SAE-1 flange, 14 inch rubber block drive and aluminium ring. 

marine gear inspected, running take-out, 380hp@1800rpm, ratio 4,5:1, S/N 3J-8423, SAE-1 flange, 14 inch rubber block drive. 

marine gear inspected, inspected and spin tested, 550hp@1800rpm, ratio 5,05:1, S/N 3W-5640, SAE-1 flange, 14” flex.coupling.

marine gear inspected and spin tested, 550hp@1800rpm, ratio 6:1, S/N 3P-9251, SAE-1 flange, 14” flex. coupling with aluminium ring.

marine gear inspected, inspected excellent running take-out, 550hp@1800rpm, ratio 5:05:1, S/N 5DS-050, SAE-1 flange. 

marine gear inspected, good running take-out, 550hp@1800rpm, ratio 5:05:1, S/N 3T-5042, SAE-1 flange with 14 inch flex. coupling.

marine gear inspected, good running take-out, 550hp@1800rpm, ratio 5:05:1, S/N 3T-2110, SAE-1 flange with 14 inch flex. coupling.

PT1976

marine gear inspected, good running take-out, 550hp@1800rpm, ratio 4:04:1, S/N 3W-4072, SAE-1 flange with 14 inch flex. coupling.

marine gear inspected and spin tested, 550hp@1800rpm, ratio 6,48:1, S/N 3S-4423, SAE-1 flange, 14” flex.coupling.

marine gear inspected and spin tested, good running take-out, 600hp@1800rpm, ratio 5,92:1, S/N 3X-5083, SAE-0 flange, 18” block drive and aluminium ring.

marine gear inspected, running take-out, 600hp@1800rpm, ratio 5,07:1, S/N 5X-93171, SAE-0 flange with flex. coupling.

marine gear inspected and spin tested, 13.000 running hours, good running take-out, 600hp@1800rpm, ratio 5,07:1, S/N 3J-8292, SAE-1 flange, 18” flex.coupling.

AS NEW marine gear inspected, running take-out,  S/N 105364, 625hp@1800rpm, ratio 3,034:1,  SAE-0 flange, 18 inch rubber block drive with aluminium ring, brackets.

marine gear inspected, inspected and spin tested, good running take-out,  S/N 3K 7721, 1010hp@1800rpm, ratio 4,94:1,  SAE-0 flange, 18 inch flex. coupling and aluminium ring.

marine gear inspected, excellent running take-out, 1075hp@1800rpm, ratio 3,91:1, S/N 3W-3852, SAE-0 flange, 18 inch flex. coupling and aluminium ring.

excellent running take-out, marine gear inspected, 325hp@1800rpm, ratio 3,82:1, S/N 5DV-734, SAE-1 flywheel flange, 14” flex. coupling.

excellent running take-out, 275hp@1800rpm, ratio 3,381:1, S/N 5AY-417, SAE-1 housing + 14 inch rubber block drive.

NEW marine gear inspected, 325/800hp@1800/2300rpm, ratio 1,75:1, S/N 5DT-426, SAE-1 flywheel flange, 14” flex. coupling.

marine gear inspected, good running take-out, 390hp@1800rpm, ratio 4,9:1, S/N 5BB-192, SAE-1 flange, 14" flex. coupling.

marine gear, running take-out, 440hp@1800rpm, ratio 4,59:1, S/N 5GC-595, SAE-1 flange, 14" rubber block-drive, oil cooler.   

marine gear, needs repair on pinion, 805hp@1800rpm, ratio 5,04:1, S/N 3X-2754, SAE-0 flange, 18" flex. coupling.

PTO  inspected, good running take-out, S/N 504315.

PTO inspected, good running take-out, 80hp @ 1800rpm, S/N 5144328.

PTO inspected, good running take-out, 180hp @ 1800rpm, S/N 25908.

CLUTCH inspected, good running take-out, 360hp @ 1800rpm, S/N 1P-3073, model # SP 214 P 107, SAE-1 flange with 14"drive ring, 2 plates.

marine gear inspected, excellent running take-out, 475hp@1800rpm, ratio 6,120:1, S/N 11452, SAE-1 flange, 14” flex. coupling.

marine gear inspected, 635hp@1800rpm, ratio 4,39:1, S/N 2684, SAE-0 flange, 18” Centax flex. coupling.

marine gear inspected, 524hp @1800rpm, ratio 4,394:1, S/N 001059, SAE-1 flange, 14” flex. coupling, 14" Vulkan, type EZ-95-1060

marine gear inspected, 525/768hp @1800rpm, ratio 4,394:1, S/N 001-112, no SAE house and oil cooler, 14" Vulkan, type EZ-95 flex. coupling

marine gear inspected, excellent running take-out, 1200hp max.@2300rpm, ratio 1,50:1, S/N 2197 SAE-1 house +14"  flex. coupling, with brackets.

marine gear inspected, excellent running take-out, 2000 running hours, 825hp @1800rpm, ratio 4,133:1, S/N 2604, oil cooler, brackets, Rato flex. S-140

marine gear inspected, excellent running take-out, 2000 running hours, 825hp max.@1800rpm, ratio 4,133:1, S/N 2605, oil cooler, brackets, Rato flex. S-140

marine gear inspected - U drive, running take-out,  ratio 1,3:1, S/N 1318, spec. nr. 302 400 6287, U-drive, electric clutch, no SAE- flange.

marine gear inspected - U drive, running take-out,  ratio 1,3:1, S/N 1317, spec. nr. 302 400 6287, U-drive, electric clutch, no SAE- flange.

GEARBOXES:

GOOD FOR PARTS 

marine gear, 600hp / 1800rpm,  ratio 5,07:1 S/N 3K0015